GrapheneOS eSIM support works on every Pixel phone the OS supports, and getting a plan running takes one Settings toggle, a QR code or activation code, and a roaming switch. Below: which Pixels take an eSIM, how to choose a plan, the install, the fixes for a stuck or silent eSIM, running it next to a physical SIM, and adding a phone number. Proxies, profiles and SMS habits belong to the wider GrapheneOS privacy stack; this page stays on the eSIM.
Key takeaways
- Every Pixel phone that GrapheneOS supports takes an eSIM. Adding one needs the eSIM support toggle in Settings, not sandboxed Google Play.
- Install under Settings > Network & internet > SIMs > Add SIM: scan the QR code, or enter the code as one LPA:1$ string.
- An install stuck at 'Checking network info...' on a working connection may need DSDS switched on from the *#*#4636#*#* menu.
- Pixel 9 owners should update to release 2026101600 or later, which fixed eSIM firmware updates on 9th generation Pixels. If it still fails, users report that switching eSIM support off and on, with a restart each time, helped.
- Most travel eSIM plans are data only. Some UK and Europe plans include a +44 or +33 number, and verification codes belong on a non-VoIP SMS number.
Does GrapheneOS Support eSIM?
Yes. GrapheneOS eSIM support covers installing, running and managing eSIMs, and adding a new one does not require sandboxed Google Play. You switch on one toggle and then use the standard Add SIM screen.
Its design is explained in the GrapheneOS usage guide. eSIMs already on the phone keep working on their own, while adding and managing them relies on proprietary Google eSIM functionality that ships fully disabled. Once you enable it, that functionality does not share data with Google Play, even when Play is installed, and only reaches a Google service when your carrier's own setup relies on one.
Which GrapheneOS Phones Support eSIM (2026)
Every Pixel phone GrapheneOS supports has an eSIM, so eSIM support follows the official supported devices list. As of November 2026 it runs from the Pixel 6 series to the Pixel 10 series, including the Pixel 10a, plus the Pixel Fold. The Pixel Tablet is on the list too, though it has no mobile radio and so no eSIM. Check each model's support end date in the same FAQ before you buy: the Pixel 6 and 6 Pro reach the end of their OEM minimum support in October 2026.
What changes by generation is how many eSIMs run at once. Google's Pixel dual SIM help page says every Pixel from the 3a onward runs one physical SIM and one eSIM together, and Pixel 7 and later can run two eSIM profiles at the same time where the carrier allows it:
| Generation | Models GrapheneOS supports | Two eSIMs at once |
|---|---|---|
| Pixel 10 | 10, 10 Pro, 10 Pro XL, 10 Pro Fold, 10a | Yes, where the carrier allows |
| Pixel 9 | 9, 9 Pro, 9 Pro XL, 9 Pro Fold, 9a | Yes, where the carrier allows |
| Pixel 8 | 8, 8 Pro, 8a | Yes, where the carrier allows |
| Pixel 7 | 7, 7 Pro, 7a, Fold | Yes, where the carrier allows |
| Pixel 6 | 6, 6 Pro, 6a | No: one eSIM plus a physical SIM |
One regional detail matters before you buy: Google notes that the Pixel 10 and later, except the Pixel 10 Pro Fold, take only eSIMs in the US, so an eSIM is the only way to add a mobile line on those models there.
Best eSIM for GrapheneOS: What to Check
The best eSIM for GrapheneOS is one you can install without an app and whose network exit you know in advance. No special plan type is needed, since any standard eSIM delivered as a QR code or activation code installs through Add SIM. Compare these on every plan:
- Install method: a QR code plus a manual activation code, so you can install from the same phone that shows the code.
- Exit: plans for one destination can route traffic out in different places, and the exit decides the IP address sites and apps see. Our explainer on where an eSIM's traffic actually exits covers why that matters, and once you are connected, the IP checker shows the exit your traffic is using.
- Coverage and validity: the destination or region, the data allowance and how many days it lasts.
- Number: whether the plan is data only or includes a phone number.
- Top-ups: whether more data can be added later to the same installed eSIM.
Which plan is best depends on the job. To keep your home number on a GrapheneOS Pixel, your own carrier's eSIM is the better pick, since only your carrier can issue one for that number. A travel eSIM is for data abroad, and our comparison of no-KYC eSIM providers lines the options up side by side.
VoidMob eSIM
- Best for: GrapheneOS users who want a private eSIM with the traffic exit shown before they pay, and no ID when paying in crypto.
- Key features: every plan shows its exit country or region before purchase, and installs from a QR code or a manual activation code with no app needed. Coverage spans 180+ destinations, and some UK (+44) and Europe (+33) plans include a number. You sign in with an email or a crypto wallet.
How to Install an eSIM on GrapheneOS
Installing an eSIM on GrapheneOS takes a few minutes on the phone itself, using the QR code or activation code from your provider. With a VoidMob plan, both appear on the eSIM's page in the dashboard once the order is ready, and that page opens in any browser.
- Turn on eSIM support. Open Settings > Network & internet > eSIM support and switch it on. It stays on across restarts.
- Open Add SIM. Go to Settings > Network & internet > SIMs, tap Add SIM and choose to set up an eSIM.
- Scan the QR code or enter the code. Scan the QR code from a second screen. If the code is on the same phone, a reply on the GrapheneOS forum reports that "Try these troubleshooting steps" reveals manual entry, and that Pixels take the server address and code as one string. Join the SM-DP+ address and activation code from the dashboard with no spaces:
LPA:1$<SM-DP+ address>$<activation code>. - Finish the download. Follow the prompts until the eSIM appears in the SIMs list.
- Turn on roaming for the eSIM line. Open the eSIM under Settings > Network & internet > SIMs and switch on Roaming. The plan activates the first time it uses mobile data.
Install from the Owner profile
A reply on the GrapheneOS forum says eSIMs can only be installed in the Owner profile, so start there rather than from a secondary user.
GrapheneOS eSIM Not Working: Fixes
When a GrapheneOS eSIM is not working, the cause usually falls into one of four cases. Work through them in this order.
Stuck on "Checking network info..."
An install that stalls at "Checking network info..." on a working connection has one documented fix: the usage guide says you may need to dial *#*#4636#*#* and switch on DSDS in the menu that opens. Then go back to Add SIM and start the download again.
Pixel 9 eSIM Won't Activate
GrapheneOS release 2026101600, published on October 16, 2026, fixed eSIM firmware updates on 9th generation Pixels, an issue that started with the October 2026 update. Update the OS before trying anything else.
Pixel 9 activation failures also fill a GrapheneOS forum thread that has run since March 2026, where posters describe the fault as an eUICC info reading of "Available memory in bytes: -1". In it, one owner says the October release fixed the problem and another says it did not. Several report that turning eSIM support off and back on, with a restart each time, let them add the eSIM afterwards. These are user reports, not official guidance.
Installed, but no data
Check three things in order: Roaming is on for the eSIM line, mobile data is assigned to the eSIM rather than your home SIM, and you are inside the plan's coverage area. If all three are right and data still fails, compare the access point name (APN) in that SIM's settings with the one in your provider's install guide.
The download never starts
A restrictive network setup, such as DNS filtering or a firewall, can block the few domains an eSIM download needs, including the SM-DP+ server named in your activation code. Pause it until the eSIM shows in the SIMs list, then turn it back on.
Run the eSIM Next to a Physical SIM
On a Pixel with a SIM tray, your home number can stay on the physical SIM while the travel eSIM carries data, with both lines active at once. Under Settings > Network & internet > SIMs you choose which line places calls, sends texts and carries mobile data, and only one line can be the default for data.
Cross-SIM calling, which the usage guide also calls backup calling, places a call on one SIM over the other SIM's mobile data, much like Wi-Fi calling. That covers the common travel case: a home SIM with no signal abroad and a travel eSIM with data. Turn on Automatic data switching under Settings > Network & internet > SIMs, and once it works, "Backup Calling" appears next to the operator name. Those calls draw on the eSIM's data. For carriers whose stock configuration is missing or incomplete, the usage guide describes a per-SIM switch under Carrier settings overrides that forces cross-SIM calling.
Get a Phone Number on GrapheneOS
Most travel eSIM plans are data only, so a phone number on GrapheneOS means choosing a plan that carries one. VoidMob's eSIM plans with a phone number are tagged in the plan list, and as of November 2026 they come in two kinds:
| Feature | UK plans with a +44 number | Europe bundle plans with a +33 number |
|---|---|---|
| Number | UK (+44) | France (+33) |
| Calls | Minutes for calls to UK numbers, incoming calls free | Unlimited within the EU |
| Texts | Not included | Unlimited within the EU |
Which plans carry a number changes with the catalog, so check the tag on the plan itself. The French number arrives by SMS after the eSIM first connects in Europe, so keep the eSIM line switched on when you land and watch your messages app.
Neither number is sold for one-time verification codes, and the UK number has no texts. For texts, add a separate carrier number from the SMS side. A dedicated non-VoIP number is one number you keep, billed monthly and not tied to one service, while a one-time number covers a single code. Both show their texts in the dashboard, not in the phone's messages app, so the eSIM's data is what lets you read them abroad.
A travel eSIM for your GrapheneOS Pixel
Prepaid data for 180+ destinations, with every plan showing its exit before you pay. Sign in with an email or a crypto wallet.
FAQ
Does eSIM activation on GrapheneOS send data to Google?
According to the GrapheneOS usage guide, eSIM management uses proprietary Google functionality that does not share data with Google Play, even when Play is installed, and only reaches a Google service when the carrier relies on one. The download itself still contacts the SM-DP+ server named in your activation code, which is how every eSIM is delivered.
Can I turn eSIM support off after the eSIM is installed?
Yes. Installed eSIMs keep working without the toggle, which is only needed to add and manage them. If your eSIM is locked with a PIN, leave the toggle on: it lets you disable the eSIM from the lockscreen if you forget the PIN, and with it off, a forgotten PIN leaves no way into the device unless you have the PUK.
Can I add an eSIM from a secondary user profile?
Start from the Owner profile. The official usage guide does not cover other profiles, but a reply on the GrapheneOS forum says eSIMs can only be installed in the Owner profile.
Do I need to reinstall the eSIM when the data runs out?
Not on plans that support top-ups. A top-up adds data to the eSIM already installed, so there is nothing to scan again. Not every plan takes one, so check before you buy if you expect to need more data.
Can I use the eSIM's phone number for verification codes?
It is not built for that. Texts are not included with the +44 number on UK plans, and neither number is sold for verification codes. For one-time codes, use a non-VoIP number from an SMS verification service, which is made for that job.
Can I convert my existing SIM card to an eSIM on GrapheneOS?
Only your carrier can issue an eSIM version of your current number. Ask them for an eSIM QR code or activation code, then install it through Add SIM like any other eSIM. A travel eSIM is a separate line and does not replace your home number.
Short version: switch on eSIM support, install with the QR code or one LPA string, turn on roaming, and if it stalls, update the OS and check DSDS before anything else.
